30510 Epoxy Motor Pump Unit

40 Size Epoxy Motor Pump Unit

Flow rate: Nominal 8.2 USgallons/min at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 1.5 bar

Model No.: 30510-5xxx

Easy to service and maintain.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
Handles hard and soft solids without clogging.
Non pulsating flow

Applications:

INDUSTRIAL: Circulating and transferring corrosiveliquids. Returning spilled liquids to process. Transferringfoaming solutions with entrained air, such as soaps anddetergents. Sampling and pilot plant installations.Handles pure solutions, acids, alkalies, photochemicals,dyes, detergents, waxes, gels, solutions with suspendedsolids and emulsions.

METAL PLATING: Filtration of plating solutions. Fillingand emptying vats. Adding chemicals for pH balance.

PHARMACEUTICAL: Processing lab solutions,medicines, lotions and preparations. Filteringpharmaceutical solutions.

AGRICULTURAL: Transferring liquid fertilizers,herbicides and pesticides.

Specifications
3 Models
Downloads

Body Materials	Epoxy Plastic
Pump/Motor Adapter	Epoxy coated cast iron
Impeller	Neoprene, Nitrile, Viton or EPDM
Seal	Carbon/Ceramic mechanical type, Optional: Tungsten Carbide/Ceramic hard faced mechanical seal
Bearings	uses motor bearings
Shaft Material	Epoxy Plastic Covered Stainless Steel
Port Type	3/4" NPT External
Voltage	115 (VAC)
Cycles	60 (Hz)
Motor	3/4 HP 1750 RPM, TEFC, 56C Frame,C-Face, Overload Protected,Capacitor Start.
Weight	35.0 (lb) 15.9 (kg)

30510-5101

30510 Epoxy Motor Pump Unit

Impeller	Neoprene
Seal Elastomer	Nitrile
Seal	Tungsten Carbide/Ceramic hard faced mechanical seal

30510-5103

30510 Epoxy Motor Pump Unit

Impeller	Nitrile
Seal Elastomer	Nitrile
Seal	Tungsten Carbide/Ceramic hard faced mechanical seal

30510-5104

30510 Epoxy Motor Pump Unit

Impeller	Viton
Seal Elastomer	Viton
Seal	Tungsten Carbide/Ceramic hard faced mechanical seal

Technical Data Sheet

30510 Epoxy Motor Pump Unit

40 Size Epoxy Motor Pump Unit

Flow rate: Nominal 8.2 USgallons/min at 1750rpmSelf-priming from dry up to 2.4m (7.8ft)Pressure up to 1.5 bar

Flow rate: Nominal 8.2 USgallons/min at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 1.5 bar