 |
|
|
|
  Click image to enlarge
DISTRIBUTOR LOCATOR: |
 100l Diesel Refuelling Pump24v Fuel Transfer PumpFlow rate: 105 Litres/min (28 gallons/min) |
| Body Materials | Cast Iron |
| Rotor | Sintered Iron |
| Vanes | Sintered Bronze |
| Shaft Material | Stainless steel |
| Seal | Nitrile Lip Seal |
| Port Type | 1" BSP or 32mm (1 1/4") hose adaptors |
| Voltage | 24 (Vdc) |
| Motor Type | Permanent magnet, thermal overload & IP55 protected |
| Temperature Range | -30 to +50 (°C) -22 to +122 (°F) |
| Duty Cycle | Continuously rated up to 6 metres (20 ft.),total head of diesel fuel at 20°C (68°F) |
Designed for refuelling large diesel powered vehicles [typical tank sizes 400 - 1500 litres (100 - 400 gallons)] from drums.
This pump can be used where high flow rates, heads and superior priming performance is required.
Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.
Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity.