50020 Bronze AC Motor Pump Unit (copy)

020 Size Bronze Flexible Impeller Pump

Flow rate: Nominal 18 Litres/min (4 gallons/min)
Self-priming from dry up to 1.5m (4.9ft)
Pressure up to 1.7 bar

Model No.: 50020 Series

Easy to service and maintain.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
Handles hard and soft solids without clogging.
Non pulsating flow
Handles viscosities up to 500 centiPoise
Uses standard IEC motor

Specifications
Downloads

Body Materials	Bronze
Impeller	Neoprene or Nitrile
Seal	Nitrile lip seal
Bearings	Uses motor bearings
Shaft Material	Stainless steel shaft extension
Port Type	½" BSP internal thread and 25mm (1") borehose connections.
Voltage	230 (VAC)
Cycles	50 (Hz)
Motor	IEC 72 180W B3/B14 63 Frame IP55
Weight	6.4 (kg) 14 (lb)

Technical Data Sheet

Industrial : Industrial filling systems, utility shop pump, transfer systems, recharge water softeners, sump emptying, cooling tower circulation, line cleaning, heat exchangers, air scrubbers, laboratory circulation, oil changing.;

Plumbing : Empty clogged drains, sumps, sinks & tubs, pump out water closets.;

Contractors : Cement mixing, wash down equipment, fill & empty tanks, empty basements.;

Agricultural : Fill water tanks, flush animal pens, plumbing water for livestock.;

Food, Beverage & Dairy : Vending Machines, refrigeration condensate pump out, wash down equipment & floor cleaning.

50020 Bronze AC Motor Pump Unit (copy)

020 Size Bronze Flexible Impeller Pump

Flow rate: Nominal 18 Litres/min (4 gallons/min)Self-priming from dry up to 1.5m (4.9ft)Pressure up to 1.7 bar

Flow rate: Nominal 18 Litres/min (4 gallons/min)
Self-priming from dry up to 1.5m (4.9ft)
Pressure up to 1.7 bar