3010 Phenolic Plastic Flexible Impeller Pump

010 Size Phenolic Plastic Pump

Flow rate: Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Self-priming from dry up to 1.5m (4.9ft)

Model No.: 3010 Series

• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.

 
 

• Specifications
• 9 Models
• Downloads

Body Materials	Phenolic Plastic
Impeller	Neoprene, Nitrile or Viton
Seal	Lip Type
Bearings	Teflon
Shaft Material	Stainless Steel or Hastelloy
Port Type	5/8" ID Hose bard
Weight	0.5 (lb) .227 (kg)

3010-1011	Phenolic Plastic Flexible Impeller Pump
	Impeller Neoprene Shaft Material Stainless Steel Seal Elastomer Nitrile
3010-1013	Phenolic Plastic Flexible Impeller Pump
	Impeller Nitrile Shaft Material Stainless Steel Seal Elastomer Nitrile
3010-1014	Phenolic Plastic Flexible Impeller Pump
	Impeller Viton Shaft Material Stainless Steel Seal Elastomer Viton
3010-1021	Phenolic Plastic Flexible Impeller Pump
	Impeller Neoprene Shaft Material Hastelloy 'B' Seal Elastomer Nitrile
3010-1023	Phenolic Plastic Flexible Impeller Pump
	Impeller Nitrile Shaft Material Hastelloy 'B' Seal Elastomer Nitrile
3010-1024	Phenolic Plastic Flexible Impeller Pump
	Impeller Viton Shaft Material Hastelloy 'B' Seal Elastomer Viton
3010-8411	Phenolic Plastic Flexible Impeller Pump
	Impeller Neoprene Shaft Material Stainless Steel Seal Elastomer Nitrile
3010-8413	Phenolic Plastic Flexible Impeller Pump
	Impeller Nitrile Shaft Material Stainless Steel Seal Elastomer Nitrile
3010-8414	Phenolic Plastic Flexible Impeller Pump
	Impeller Viton Shaft Material Stainless Steel Seal Elastomer Viton

 Technical Data Sheet