Rule In-Line Blowers

Rule In-Line Blower – 3" or 4" Ducting

Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.

Efficient high-volume air flow
Quiet operation
Low amp draw
Slip-on inlet and outlet ducting connections
Sealed motor shaft for moisture protection
Corrosion resistant nickel-plated motor housing
IMCI (CE)
USCG 183.410 Compliant: Ignition protected

Applications:

Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation

Specifications
4 Models
Downloads

Approvals	CE
Body Materials	Corrosion resistant, nickel-plated motor housing

140

Rule In-Line Blower – 3" DuctingDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.
Applications:

Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation

Approvals	CE
Dimensions (H x W x D)	76 x 127 x 81 (mm)
ElectricalCharacteristics1	2.9 Amp
Flow Rate (US gallons & litres)	135 CFM @ Open Flow
Fuse Size	4 (amp)
Product Inlet Fitting	3" (76 mm) Ducting
Product Outlet Fitting	3" (76 mm) Ducting
Voltage	13.6 (Vdc)

140-24V

Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation

Approvals	CE
Dimensions (H x W x D)	76 x 127 x 81 (mm)
ElectricalCharacteristics1	1.7 Amp
Flow Rate (US gallons & litres)	135 CFM @ Open Flow
Fuse Size	2.5 (amp)
Product Inlet Fitting	3" (76 mm) Ducting
Product Outlet Fitting	3" (76 mm) Ducting
Voltage	27.2 (Vdc)

240

Rule In-Line Blower – 4" DuctingDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.
Applications:

Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation

Approvals	CE
Dimensions (H x W x D)	102 x 152 x 106 (mm)
ElectricalCharacteristics1	4.3 Amp
Flow Rate (US gallons & litres)	235 CFM @ Open Flow
Fuse Size	7 (amp)
Product Inlet Fitting	4" (102 mm) Ducting
Product Outlet Fitting	4" (102 mm) Ducting
Voltage	13.6 (Vdc)

240-24V

Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation

Approvals	CE
Dimensions (H x W x D)	102 x 152 x 106 (mm)
ElectricalCharacteristics1	2.4 Amp
Flow Rate (US gallons & litres)	235 CFM @ Open Flow
Fuse Size	4 (amp)
Product Inlet Fitting	4" (102 mm) Ducting
Product Outlet Fitting	4" (102 mm) Ducting
Voltage	27.2 (Vdc)

Datasheet