30520 Epoxy Pump Head Kit

80 Size Epoxy Pump Head Kit

Flow rate: Nominal 21.8 USgallons/min at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 1.5 bar

Model No.: 30520-3xxx

Easy to service and maintain.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
Handles hard and soft solids without clogging.
Non pulsating flow

Applications:

INDUSTRIAL: Circulating and transferring corrosiveliquids. Returning spilled liquids to process.Transferring foaming solutions with entrained air, suchas soaps and detergents. Sampling and pilot plantinstallations. Handles pure solutions, acids, alkalies,photo chemicals, dyes, detergents, waxes, gels,solutions with suspended solids and emulsions.

METAL PLATING: Filtration of plating solutions. Fillingand emptying vats. Adding chemicals for Ph balance.

PHARMACEUTICAL: Processing lab solutions, medicines,lotions and preparations. Filtering pharmaceutical solutions.

AGRICULTURAL: Transferring liquid fertilizers, herbicidesand pesticides.

Specifications
Downloads

Body Materials	Epoxy Plastic
Pump/Motor Adapter	Epoxy coated cast iron
Impeller	Neoprene, Nitrile, Viton or EPDM
Seal	Carbon/Ceramic mechanical type, Optional: Tungsten Carbide/Ceramic hard faced mechanical seal
Seal Elastomer	Nitrile or Viton
Bearings	Uses motor bearings
Shaft Material	Epoxy Plastic Covered StainlessSteel
Port Type	1" NPT Internal
Motor	1-1/2 HP,1740 RPM, TEFC, H145TC Frame, C-Face can be fitted
Weight	10.5 (lb) 4.8 (kg)

Technical Data Sheet

30520 Epoxy Pump Head Kit

80 Size Epoxy Pump Head Kit

Flow rate: Nominal 21.8 USgallons/min at 1750rpmSelf-priming from dry up to 2.4m (7.8ft)Pressure up to 1.5 bar

Flow rate: Nominal 21.8 USgallons/min at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 1.5 bar