4GPM/15LPM Industrial Diaphragm Pumps

• Pump Body: Glass Filled Polypropylene
• Elastomers: Diaphragm made of Santoprene* Valves made of Viton
• Hardware: 316 Stainless Steel
• Pump Design: Four-Chamber Diaphragm
• Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)
• Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread
• Motor: Permanent Magnet with Thermal Overload Protection
• Shipping Weight: 5.5 lb (2.5 kg) approx. (12/24 V models)
• Duty Cycle: Continuous at 15 psi (1 bar) and 70°F (21°C) ambient temperature
• Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)
• Viscosity: 250 cP maximum

• Self Priming.
• Can run dry without damage.
• Flow to 4GPM/15LPM.
• Thermal Overload Protected Motor.
• Snap-in 1/2" Dia. Port Adapters.
• Easy Installation.
• Low Amp Draw.
• Quiet Running

 Technical Data Sheet