DN25 Series

Metal to Metal Seated Hydraulic Solenoid Pilot Valves

The stainless steel seat design ensures a leak tight shut off while incorporating a balanced internal piloting system to enable the low powered solenoid coil to switch the valve at high pressures.

The DN25 Mainstage uses cartridge insert technology which simplifies replacement and considerably reduces "downtime" costs. Features of the DN25 are an 'O' Ring interface that enables it to be fitted with a subplate, or manifold mounted for use in local control panels for actuators and wellhead control applications. By removing just 4 bolts the valve can be dismounted without disturbing pipework and possibly contaminating the hydraulic system. Blanking or flushing plates can also be supplied.

• Specifically designed for Offshore Severe Environments
• Certified Zone 1 Class 1 Hazardous Areas
• ATEX 94/9/EC
• M.T.B.F., SFF, PFD and SIL Data (Available upon request)
• Easy installation, Repair and Replacement
• Ambient Temperature Range -50ºC to 60ºC
• Low Power Consumption (3.5 & Watts)
• #316 Stainless Steel Construction
• 400 bar max Pressure
• 200 litres/min
• Leak tight

 DN25 Series