1900 Series Direct Acting Valves Solenoid Operated

Gases	Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available. (details on application)
Liquids	Low pressure hydraulic, mineral oil or water
Port(s)	1/4", 3/8", 1/2" NPT (BSP option available)
Orifice	8.8 (mm) 0.35 (inches)
Cv (Kv)	0.86 (12.25)
Working Pressure (gases & liquids)	Maximum body pressure 20 bar (290 psi); Maximum operating pressure differential 10 bar (145 psi)
Ambient Temperature	-50ºC to +40ºC (-58ºF to +104ºF)
Construction Materials	Stainless Steel AISI 316 S11 to NACE MR-01-75 Body; 316 Stainless Steel Spindle; 316 Stainless Steel Springs; Nitrile (BUNA N) Seals options; Fluoroelastomer and EPDM
Solenoid Specifications	Flameproof EExd IIC T6 to ATEX standard
Degree of Protection	IP67
Body Materials	316 Stainless Steel
Cable Entry	M20 x 1.5
Coil Voltages	DC - 12v, 24v 110v; AC - (50/60 Hz) 24v, 110v, 120v, 220v
Voltage Tolerance	+10% to -15%
Power Consumption	DC - 6 Watts; AC units fitted with DC rectifier
Coil Insulation	Class H
Duty Cycle	100% Continuously Rated
Earth Connections	Internal and External