DN15 Series

Metal to Metal Seated Hydraulic Solenoid Pilot Valve

The stainless steel seat design ensures a leak tight shut off, while incorporating a balanced internal piloting system to enable the low powered solenoid coil to switch the valve at high pressures. The DN15 Mainstage uses cartridge insert tecchnology which simplifies replacement and considerably reduces "downtime" costs.
Features of the DN15 are an 'O' Ring interface that enable it to be fitted with a subplate, or manifold mounted for use in local control panels for actuators and wellhead control applications. By removing just 4 bolts the valve can be dismounted without disturbing pipework and possibly contaminating the hydraulic system. Blanking or flushing plates can also be supplied.

• Specifically designed for Offshore Severe Environments
• Certified Zone 1 Class 1 Hazardous Areas
• ATEX 94/9/EC
• M.T.B.F., SFF, PFD and SIL Data (Available upon request)
• Easy installation, Repair and Replacement
• Ambient Temperature Range -50 to 60ºC
• Low Power Consumption (3.5 & 8 Watts)
• 316 Stainless Steel Construction
• 400 bar Max Pressure
• 100 litres/min
• Leak tight

 DN15 Series