18220 Ballast Puppy Bronze DC Pump

Wakeboard Towboat Ballast Pump

Flow rate: 11 USgallons/min (40 Litres/min)
Self-priming from dry up to 1.8m (6ft)

Model No.: 18220-1121

Fills a typical 180 litre ballast tank in under 5 minutes
Reversible to both fill and empty tanks
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).

Applications:

The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 11 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

Specifications
Downloads

Body Materials	Bronze
Impeller	Jabsco Neoprene compound
Seal	Lip Type
Port(s)	1/2" Internal Pipe Threads1" External Hose Barb
Voltage	12 (Vdc)
Amp Draw	11.5 (amp)
Fuse Size	15 (amp)
Motor Type	Equipped with Run-Dry Protection Device(Patent Pending)Permanent Magnet TypeFully EnclosedStainless Steel ShaftBall Type Shaft BearingReversible
Dimensions	9.3 x 18.2 x 12 (cms) 3 5/8 x 7 1/8 x 4 3/4 (inches)
Weight	6 (lb) 2.7 (kg)

Technical Data Sheet

18220 Ballast Puppy Bronze DC Pump

Wakeboard Towboat Ballast Pump

Flow rate: 11 USgallons/min (40 Litres/min)Self-priming from dry up to 1.8m (6ft)

Flow rate: 11 USgallons/min (40 Litres/min)
Self-priming from dry up to 1.8m (6ft)