17830 Series Reversible Bronze DC Pump

Flow rate: 6.3 gallons/min (24 Litres/min)
Self-priming from dry up to 1.2m (4ft)

Model No.: 17830 Series

Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).

Applications:

The Jabsco Oil Change Pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve(provided) to guard against accidental oil discharge.

Specifications
2 Models
Downloads

Body Materials	Bronze
Impeller	Nitrile
Seal	Nitrile Lip Type
Valves	3/8" NPT Full Flow Ball Type
Port Type	3/8" NPT
Voltage	12 or 24 (Vdc)
Motor Type	Reversible Permanent Magnet with Integral Reversing Switch
Dimensions	11.3 x 20.0 x 9.5 (cms) 4-7/16 x 3-3/4 x 7-7/8 (inches)
Weight	9 (lb) 4.1 (kg)

17830-0012

Reversible Bronze DC Pump

Voltage	12 (Vdc)
Amp Draw	10 (amp)
Fuse Size	15 (amp)

17830-0024

Reversible Bronze DC Pump

Voltage	24 (Vdc)
Amp Draw	5 (amp)
Fuse Size	8 (amp)

Technical Data Sheet

17830 Series Reversible Bronze DC Pump

Flow rate: 6.3 gallons/min (24 Litres/min)Self-priming from dry up to 1.2m (4ft)

Flow rate: 6.3 gallons/min (24 Litres/min)
Self-priming from dry up to 1.2m (4ft)