Welcome to the new Xylem Flow Control Website
You have perhaps been redirected here from one of our Brand websites, this new site brings together all our brands
under one combined site with the same features and content you had before and some new.
  Close this message
X
Xylem Flow Control
Xylem Flow Control

Xylem Flow Control

  • Home
  • About Xylem
  • Literature
  • News & Events
  • Support Center
  • Contact Us
    • Send Enquiry
    • Factory Locations

Marine / RV / Blowers & Ventilation
Flangemount Blower
Flangemount Blower
 Click image to enlarge


     
    DISTRIBUTOR LOCATOR:


    Flangemount Blower

    Jabsco Flangemount Blower – Commercial Duty


    Generally mounted with discharge port fastened directly to a flat external surface to minimize required ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard models are rated for intermittent service, 15 minutes maximum. Commercial duty models are rated for continuous service. For International & US Markets


    • Do not use where flammable vapours are present.

    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation


     
     
    • Specifications
    • 10 Models
    Approvals CE
    Duty Cycle Continuous service
    34739-0010
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 193 x 168 x 203 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 6.5 Amp
    Flow Rate (US gallons & litres) 150 CFM (70,800 CUCM/sec)
    Fuse Size 10 (amp)
    Product Inlet Fitting 3" (76.2 mm)
    Product Outlet Fitting 2 3/4" (70 mm)
    Voltage 12 (Vdc)
    Weight 5.0 lbs (2.3 kg)

    34739-0020
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 193 x 168 x 203 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 3.3 Amp
    Flow Rate (US gallons & litres) 150 CFM (70,800 CUCM/sec)
    Fuse Size 5 (amp)
    Product Inlet Fitting 3" (76.2 mm)
    Product Outlet Fitting 2 3/4" (70 mm)
    Voltage 24 (Vdc)
    Weight 5.0 lbs (2.3 kg)

    34739-0031
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 193 x 168 x 213 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 1 Amp
    Flow Rate (US gallons & litres) 140 CFM (66,000 CUCM/sec)
    Fuse Size 1.3 (amp)
    Product Inlet Fitting 3" (76.2 mm)
    Product Outlet Fitting 2 3/4" (70 mm)
    Voltage 115 (VAC)
    Weight 5.0 lbs (2.3 kg)

    34744-0000
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 193 x 168 x 175 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 0.7 Amp
    Flow Rate (US gallons & litres) 100 CFM (47,200 CUCM/sec)
    Fuse Size 0.8 (amp)
    Product Inlet Fitting 3" (76.2 mm)
    Product Outlet Fitting 2 3/4" (70 mm)
    Voltage 115 V AC  (VAC)
    Weight 5.0 lbs (2.3 kg)

    35115-0020
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 140 x 121 x 171 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 4.4 Amp
    Flow Rate (US gallons & litres) 105 CFM (49,600 CUCM/sec)
    Fuse Size 6 (amp)
    Product Inlet Fitting 3" (76.2 mm)
    Product Outlet Fitting 2 3/4" (70 mm)
    Voltage 12 (Vdc)
    Weight 4.0 lbs (1.8 kg)

    35400-0010

    35400-0092
    Jabsco Flangemount Blower – Standard DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 229 x 222 x 222 (mm)
    Duty Cycle 15 mins duty max
    ElectricalCharacteristics1 10 Amp
    Flow Rate (US gallons & litres) 250 CFM (118,000 CUCM/sec)
    Fuse Size 15 (amp)
    Product Inlet Fitting 4" (101.6 mm)
    Product Outlet Fitting 3 5/8" (91 mm)
    Voltage 12 (Vdc)
    Weight 6.0 lbs (2.7 kg)

    35760-0092
    Jabsco Flangemount Blower – Commercial DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 229 x 230 x 222 (mm)
    Duty Cycle Continuous service
    ElectricalCharacteristics1 11 Amp
    Flow Rate (US gallons & litres) 250 CFM (118,000 CUCM/sec)
    Fuse Size 15 (amp)
    Product Inlet Fitting 4" (101.6 mm)
    Product Outlet Fitting 3 5/8" (91 mm)
    Voltage 12 (Vdc)
    Weight 6.0 lbs (2.7 kg)

    35760-0094
    Jabsco Flangemount Blower – Commercial DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 229 x 230 x 222 (mm)
    Duty Cycle Continuous service
    ElectricalCharacteristics1 6 Amp
    Flow Rate (US gallons & litres) 250 CFM (118,000 CUCM/sec)
    Fuse Size 10 (amp)
    Product Inlet Fitting 4" (101.6 mm)
    Product Outlet Fitting 3 5/8" (91 mm)
    Voltage 24 (Vdc)
    Weight 6.0 lbs (2.7 kg)

    36760-0115
    Jabsco Flangemount Blower – Commercial DutyGenerally mounted with discharge port fastened directly to a flat external surface to minimize ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard model – rated for 15 minutes maximum duty.
    Applications:
    Race cars and helmet ventilation;Bus ventilation (engine and bathroom fumes);Prison van ventilation (cooling, air-freshening);Blow-up signs and mascots;Tanning booths;Building ventilation
    Approvals CE
    Dimensions (H x W x D) 229 x 230 x 222 (mm)
    Duty Cycle Continuous service
    ElectricalCharacteristics1 1.5 Amp
    Flow Rate (US gallons & litres) 250 CFM (118,000 CUCM/sec)
    Fuse Size 3 (amp)
    Product Inlet Fitting 4" (101.6 mm)
    Product Outlet Fitting 3 5/8" (91 mm)
    Voltage 115 (VAC)
    Weight 9.0 lbs (4.1 kg)


     
    • Home
    • About Xylem
    • Literature
    • News & Events
    • Support Center
    • Legal Disclaimer
    • Privacy Policy
    • Accessibility
    • Site Map

    Channel Partners Sign-In