Xylem Flow Control

Xylem Flow Control

Marine / RV / Bilge / Jabsco Engine Driven Clutch Pumps

50080 1" Bronze Electro-Magnetic Clutch Pump

Click image to enlarge

Click image to enlarge

DISTRIBUTOR LOCATOR:

Jabsco

50080 1" Bronze Electro-Magnetic Clutch Pump

080 Size Bronze FIP Electro-Magnetic Clutch Pump

Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)

Model No.: 50080 Series

Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.

Metric Units (European)

Specifications
4 Models
Downloads

Body Materials	Bronze
Impeller	Neoprene or Nitrile
Wearplate	Replaceable
Shaft Material	Stainless steel
Seal	Lip type
Bearings	Twin row, ball type
Port Type	1" BSP to BS21 (DIN2999)
Clutch Type	Electro-magnetic 12 or 24Vdc
Pulley	178mm (7") 'A' or 'B' section
Weight	11 (lb) 5 (kg)

50080-2001

50080 1" Bronze Electro-Magnetic Clutch Pump

Impeller	Neoprene
Coil	12v dc
Pulley	2A Section
Amp Draw	3 (amp)

50080-2101

50080 1" Bronze Electro-Magnetic Clutch Pump

Impeller	Neoprene
Coil	24v dc
Pulley	2A Section
Amp Draw	1.5 (amp)

50080-2201

50080 1" Bronze Electro-Magnetic Clutch Pump

Impeller	Neoprene
Coil	12v dc
Pulley	1B Section
Amp Draw	3 (amp)

50080-2301

50080 1" Bronze Electro-Magnetic Clutch Pump

Impeller	Neoprene
Coil	24v dc
Pulley	1B Section
Amp Draw	1.5 (amp)

Technical Data Sheet