30570 Motor Pump Unit

P200 Sanitary Stainless Steel Motor Pump Unit

Flow rate: Nominal 51 USgallons/min (193 Litres/min) at 1750rpm
Self-priming from dry up to 5m (16.4ft)
Pressure up to 2.5 bar

Model No.: 30570-4xxx & 30570-5xxx

Handles soft solids - max. 16mm diameter
Certified to US 3A Standard 02-11
Clean-In-Place (CIP) or easy strip clean
Minimal shear to thixotropic fluids
Easy to service and maintain

Applications:

DAIRY: Transfer and processing of raw milk, cream, milkwhey, buttermilk, condensed milk.

FOODS: Processing of eggs, sugar liquors, brines,catsup, chocolate, glaze, gelatin, honey, jams, jellies,mayonnaise, molasses, mustard, pickle relish, vinegar,water, yeast slurries, syrups, liquids containing solids insuspension such as chopped tomatoes, nuts, peanut butter.

BEVERAGE: Circulating and transferring alcohols, beers,brewery slop, cider, distillery wort, extracts,flavors, juice, mash, soft drink syrups, wines.

PHARMACEUTICAL: Moving medicines, cosmetics,process chemicals, lotions, preparations, filteringsolutions, used as a filling line supply pump.

Specifications
4 Models
Downloads

Body Materials	316 Stainless Steel
Pump/Motor Adapter	Epoxy coated cast iron
Impeller	3A Food Grade Neoprene or EPDM
Seal	Carbon/Ceramic mechanical type, Optional: Tungsten Carbide/Ceramic hard faced mechanical seal or Tungsten Carbide / Ceramic hard faced flushed seal
Seal Elastomer	Food grade Nitrile
Bearings	Uses motor bearings
Shaft Material	316 Stainless Steel
Port Type	1-1/2" ACME Threads with Bevel Seat orClamp Type
Voltage	230 or 460 (VAC)
Frequency	60 (Hz)
Motor	5 HP, 1750 rpm, TEFC, C-Face, 184 TC Frame
Weight	42.5 (kg) 93.5 (lb)

30570-4005

30570 Motor Pump Unit

Impeller	Neoprene
Seal	Carbon/Ceramic mechanical
Port Type	1 1/2" ACME

30570-4105

30570 Motor Pump Unit

Impeller	Neoprene
Seal	Tungsten Carbide/Ceramic hard faced mechanical seal
Port Type	1 1/2" ACME

30570-5005

30570 Motor Pump Unit

Impeller	Neoprene
Seal	Carbon/Ceramic mechanical
Port Type	1 1/2" Clamp

30570-5105

30570 Motor Pump Unit

Impeller	Neoprene
Seal	Tungsten Carbide/Ceramic hard faced mechanical seal
Port Type	1 1/2" Clamp

Technical Data Sheet

30570 Motor Pump Unit

P200 Sanitary Stainless Steel Motor Pump Unit

Flow rate: Nominal 51 USgallons/min (193 Litres/min) at 1750rpmSelf-priming from dry up to 5m (16.4ft)Pressure up to 2.5 bar

Flow rate: Nominal 51 USgallons/min (193 Litres/min) at 1750rpm
Self-priming from dry up to 5m (16.4ft)
Pressure up to 2.5 bar