24 Series Hygienic Rotary Lobe Pump

Tri Lobe

Jabsco 24-series hygienic rotary lobe pumps have been in service worldwide for nearly 20 years. The continued popularity of the 24-series reflects the advanced hygienic design and manufacturing methods brought in by Jabsco at the time of its introduction. 24-series pumps use the tri-lobe rotor design proven in service with the world's leading producers of food products, pharmaceuticals and cosmetics

Model No.: 24 Series

Flow rates up to 126m³/hr (35 litres/second)
Pressures up to Up to 10bar (146 psi)
Temperature range: -40ºC to +200ºC
Liquid viscosity range: 1 to 1,000,000 centipoise

Applications:

Food; Personal Care; Chemical

Specifications
10 Models

Body Materials	316 Stainless Steel
Rotor	316 Stainless Steel
Port Type	All US and European standards
Seal	Options include: Front-loaded single mechanical face-type seals of hygienic design. Materials include carbon, stainless steel and silicon carbide. Low-pressure flush seals use the same single mechanical seal with an additional housing. Double mechanical seals use all the components from single seals. Front loaded single O-Ring seals. Front loaded double O-Ring seals. Multiple PTFE lip seal complete with controlled release food-grade grease injection system.
Bearings	High specification taper roller bearings
Operating temperature	-40 to 492°F (-40 to 200°C)
Approvals	3A variants with Nitrile or EPDM elastomers

Adaptable: modular design permits prompt pump assembly to suit the exact specification required for a given application.
Rugged: large diameter shafts, mounted in precision tapered-roller bearings and rigidly mounted for maximum shaft stiffness, to resist over-pressure and other kinds of rough use.
Low Maintenance: shaft, bearing and gear assemblies are immersed in an oil bath, for long life even at the pump's limits of operating pressure and temperature. Fully interchangeable rotors avoid the need for routine re-timing, but the timing gears are easily accessible if re-timing should become necessary.