3GPM/12LPM Industrial Diaphragm Pumps

SPECIFICATIONS

;Pump Body: Glass Filled Polypropylene

;Elastomers: Diaphragm made of Santoprene* Valves made of Viton

;Hardware: 316 Stainless Steel

;Pump Design: Four-Chamber Diaphragm

;Suction Lift: Self-Priming to 10 ft (3m) (wet) 5 ft. (1.5m) (dry)

;Ports: 1/2" (13mm) Hose Barb and 1/2" (13mm) Straight Pipe Thread

;Motor: Permanent Magnet with Thermal Overload Protection

;Shipping Weight: 7 lb (3.2 kg) approx. (12/24 V models)

;Duty Cycle: Continuous at 40 psi (2.8 bar) and130°F (54.4°C) ambient temperature

;Temperature: Liquid temperature range is 45°F to 130°F (7°C to 54°C)

;Viscosity: 250 cP maximum

• Self Priming.
• Can run dry without damage.
• Flow to 3GPM/12LPM.
• Thermal Overload Protected Motor.
• Snap-in 1/2" Dia. Port Adapters.
• Easy Installation.
• Low Amp Draw.
• Quiet Running

 Technical Data Sheet