G60 Series Water Booster Pump

Model No.: G60 Series

Ultimate performance and reliability with extended service life
Quiet operation
Easy installation with quick disconnect ports

Applications:

Water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee manchines, hand sinks, ice machines and FCB equipment;Supplies up to 4 GPM (15L/min). Note: If pumping over 1/7 GPM (6.4L/min), a pulsation dampeneror accumulator tank should be utilised to reduce pulsation, due to momentary shifts in flow requirements.;Capable of CO2 inlet pressures up to 90 psi (6.2 bar)

Universal Use (Metric or US Customary Units)

Specifications
1 Models
Downloads

Pump Drive	CO2 gas, Nitrogen or compressed dry filtered air
Materials of Construction	(wetted parts:) Polypropylene, Santoprene®, EPDM, AISI 303 & 304 Stainless Steel
Displacement US Gallons (litres)	3.2 oz (91ml) per cycle
Operating Pressure	20 - 90 PSI; 1.4 - 6.2 bar max
Operating temperature	34°F to 120°F; 1.1°C to 49°C
Maximum Liquid Inlet Pressure	30 psi; 2.1 bar max
Flow Rate (US gallons & litres)	5 GPM (18.9 LPM) - open flow
Dimensions (H x W x D)	5.27 x 3.21 x 4.58 (inches) 133.8 x 81.5 x 116.3 (mm)
Warranty Period	1 year
Approvals	CE, SK, NSF Standard 18
Weight	1.24 (lb) 0.56 (kg)

G60-1215

Water Booster Pump

Product Inlet Fitting	1/2" (9.52mm) Barbed Straight Plastic(Polypropylene)
Product Outlet Fitting	1/2" (9.52mm) Barbed Straight Plastic (Polypropylene)
Gas/Air Inlet Fitting	1/4" (6.35mm) CO2 Shutoff Brass

Datasheet/Installation sheet