Xylem Flow Control

Xylem Flow Control

Beverage Dispensing / Bottled Water Systems

Dual Inlet Bottled Water Dispensing System

Click image to enlarge

Click image to enlarge

DISTRIBUTOR LOCATOR:

Flojet

Dual Inlet Bottled Water Dispensing System

The Flojet Model BW Series

At just 6" x 8", the Flojet Dual Inlet Bottled Water Dispensing System is the most compact system you can buy and it's the most affordable.

Model No.: BW Dual Series

Exclusively from Flojet
Simulteneous draw from two bottles
Patented "T" design
Available in Appliance Controller interface configuration
Backward compatability to Flojet Single Inlet BW system
Built-in check valve

Universal Use (Metric or US Customary Units)

Specifications
Downloads

Flow Rate	1.0 (gpm) 3.8 (lpm)
Max. Pressure	40 (psi) 2.8 (bar)
Dimensions	3.0 H x 5.5 W x 7.5 D (inches) 7.6 x 14.0 x 19.0 (cms)
Voltage	115 or 230 (VAC) 12 (Vdc)
Amp Draw	12 Volt 3.0 Amps. Max.115 Volt 0.5 Amps. Max.230 Volt 0.25 Amps. Max.
Cycles	AC models 50/60 (Hz)
Weight	6.4 (lb) 2.9 (kg)

ENG / SPA Installation Manual

Appliance Controller Interface Kit Instructions