Xylem Flow Control

Xylem Flow Control

Beverage Dispensing / Booster Systems

K56 Series Water Booster System

Click image to enlarge

Click image to enlarge

DISTRIBUTOR LOCATOR:

Flojet

K56 Series Water Booster System

Flojet's K56 Series Water Booster Systems are designed for supplying consistent water pressure to beverage dispensers, coffee machines, water filtration systems, carbonators & ice machines.
Supplies up to 4 gpm (15 lpm). For use when water requirement is over 1.7 gpm (6.4 lpm).

Model No.: K56 Series

Half-gallon (1.9L) accumulator tank maintains constant flow requirements
Capable of CO2 inlet pressures of up to 90 psi (6.2 bar)
Ultimate performance and reliability, with extended service life
Quiet operation with exhaust muffler
Easy installation with all quick disconnect ports

Specifications
1 Models
Downloads

Power Source	CO2 Gas, Nitrogen or Compressed Filtered Air
Materials of Construction	Polypropylene, Santoprene, EPDM, Nylon, Butyl, AISI 303 & 304 Stainless Steel, Brass
Temperature Range	34-120 (°F) 1.1-49 (°C)
Displacement	3.2 oz. per cycle
Self Priming	Up to 10 ft. (3.05 m)
Operating Pressure	60 - 90 (psi ) 4.1 - 6.2 (bar)
Max. Liquid Inlet Pressure	30 (psi) 2.1 (bar)
Flow Rate	5 (gpm) 18.9 (lpm)
Tank Charge Pressure	20 (psi) 1.4 (bar)
Dimensions	30.48 x 29.21 x 17.78 (cms) 12 H x 11.5 W x 7 D (inches)
Weight	2.46 (kg) 5.42 (lb)

K56-1030A

Water Booster System

Single pump with 1/2 gallon accumulator tank and a large muffler

Product Inlet Fitting	1/2" (12.7mm) Barbed Straight PlasticBarbed Straight Plastic
Product Outlet Fitting	1/2" (12.7mm) Barbed Straight NylonBarbed Straight Plastic
Gas/Air Inlet Fitting	1/4" (6.35mm) CO2 Shutoff BrassCO2 Shutoff Brass Straight

K56 Series Installation and Service Data